Tungsten Carbide Grinding Wheel Set with Flat, Beveled and Arc Discs for Angle Grinder

Shape Wood Faster With These Tungsten Carbide Grinding Discs

You're halfway through carving that tea tray and your sanding disc just tore apart again. You're stopping every ten minutes to swap out worn pads, and the project that should've taken an hour is dragging into your whole afternoon. These discs mount onto your angle grinder and cut through wood shaping tasks like trimming, carving, and chamfering without wearing down.

Each disc mounts onto a standard angle grinder with a 16 millimeter bore. The tungsten carbide coating has hundreds of sharp teeth that bite into wood and remove material quickly. You get three different disc shapes: one flat disc at 100 millimeters, one beveled disc at 100 millimeters, and one arc disc at 85 millimeters.

The flat disc works on level surfaces and straight edges. The beveled disc tackles angled cuts and chamfers. The arc disc reaches into curved areas and concave spots where flat discs can't go.

The tungsten carbide holds its edge through repeated use on wood projects. The discs handle root carving, tea plate shaping, and general woodworking without breaking down. They work on convex surfaces, concave areas, beveled edges, and flat sections.

• TUNGSTEN CARBIDE TEETH: Hundreds of sharp carbide points remove wood stock rapidly and outlast typical sanding pads through extended carving sessions.
  
  
• THREE DISC PROFILES: Flat, beveled, and arc shapes let you reach different surface angles and curves during one project.
  
  
• 16 MILLIMETER BORE: Fits standard angle grinders directly without adapters, letting you swap between discs in seconds during active work.
  
  
• 100 MILLIMETER DIAMETER: The flat and beveled discs measure four inches across, covering larger surface areas with each pass.
  
  
• 85 MILLIMETER ARC DISC: The smaller curved disc reaches tight concave spots and detailed carving areas that larger discs miss.
  
  
• NON METALLIC USE: Designed for wood trimming, root carving, tea plates, and hand projects without damaging the carbide coating.
  
  
• RAPID STOCK REMOVAL: The carbide teeth cut through material faster than sandpaper, reducing time spent on shaping and rough finishing.
  
  
• MULTI SURFACE CAPABILITY: Handles beveled edges, flat surfaces, convex curves, and concave areas with the right disc profile selection.

TUNGSTEN CARBIDE GRINDING DISC SET SPECS

• Material: Tungsten Carbide
  
  
• Color: Gold
  
  
• Flat Disc Diameter: 100mm
  
  
• Beveled Disc Diameter: 100mm
  
  
• Arc Disc Diameter: 85mm
  
  
• Bore Diameter: 16mm
  
  
• Compatible Tool: Angle Grinder

PACKAGE INCLUDES:

• 1 x Flat Grinder Shaping Disc
  
  
• 1 x Beveled Wood Carving Grinding Disc
  
  
• 1 x Arc Wood Carving Disc